The GuardLink® EtherNet/IP module monitors three independent channels of GuardLink-enabled devices and communicates the status of those devices to a safety-rated controller over a CIP Safety EnterNet/IP network. You can configure this relay by selecting certified safety function blocks to rapidly build your applications. This interface integrates seamlessly with Allen-Bradley® GuardLogix® controllers and can be configured using Studio 5000 Logix Designer® software.
Each independent channel has a series connection of up to 32 safety devices that monitor the status of machine-access points. With three channels, one interface can monitor up to 96 individual safety devices. Being independent, each channel can be used by the safety controller to control three separate zones of a machine. Using logic, the channels can also be combined to control one or two zones.
The interface is designed to be mounted on-the-machine (outside of a control panel). The IP66, IP67, and IP69K ratings allow it to be in many wet environments.
- Communicates CIP Safety over EtherNet/IP
- Conforms to ODVA CIP Safety, CIP Sync, and CIP Security
- Provides automatic diagnostics with PanelView™ 5000 and FactoryTalk® View Site Edition
- Includes up to three independent channels
- Monitors up to 32 devices per channel
- Controls 1, 2, or 3 machine zones
- Firmware upgrades for GuardLink 2.0 devices
- Mounts On-Machine (IP66, IP67, and IP69K)
- Applications up to PLe, Cat 4 per ISO-13849-1 and SIL 3 per IEC 61508
The 432ES-IG3 is ideally suited for safety applications that require the monitoring of many safety devices and knowledge of which of those devices has caused a machine zone to transition from an operational to a safe state, while maintaining the highest level of machine safety performance and integrity. Typical safety applications include:
- Food and Beverage
- Material Handling
- Conveyors
- Packaging
- Automotive
- Mining/Metals/Cement
- Semiconductors and Electronics
- Life Sciences
Documentation
Resource | Publication Number | Language |
---|---|---|
GuardLink Safety Linking Technology Brochure | GLINK-BR001 |
Certifications
- CE Marked for all applicable directives
- RoHS (Restriction of Hazardous Substances) for 25 years
- cULus Listed
- Morocco Conformity
- Korean Registration of Broadcasting and Communications Equipment
- Australian Radio Communication
- UKCA Marked for all application regulations
- ODVA CIP Safety over EtherNet/IP, CIP Sync, and CIP Security
- Waste Electrical and Electronic Equipment
Safety Classification
- SIL 3 per EN IEC 61508
- PLe per ISO 13849-1
Software
Tools & Resources
Application Demonstration
Watch our demonstration of a safety control system that uses the 432ES-IG3 GuardLink® On-Machine™ EtherNet/IP™ interface to monitor emergency stops, locking guard doors, and non-locking guard doors.
Guard Link Node Module Discovery
Watch how to configure GuardLink® nodes to communicate to the 432ES-IG3 GuardLink On-Machine™ EtherNet/IP™ interface and troubleshoot node configuration errors using online device discovery.
Guard Logix Data Flow
This video reviews the data flow between the 432ES-IG3 On-Machine™ EtherNet/IP™ interface and GuardLogix®. Understanding the different types of data available can streamline application program development.
Guard Logix I/O Configuration
This video demonstrates how to add the GuardLink® On-Machine™ EtherNet/IP™ interface to the GuardLogix® I/O Configuration.
Guard Logix Programming
Watch our guided tour of a GuardLogix programming example that monitors three GuardLink channels and 9 GuardLink nodes. This video reviews how to use the safety and standard data sent and received.
Interface Module - Introduction and wiring
This video introduces the 432ES-IG3 GuardLink® On-Machine™ EtherNet/IP™ interface module and steps through the required hardware wiring connections.
Guard Link Node Manual Configuration
This video demonstrates how to manually configure GuardLink® nodes to communicate to the 432ES-IG3 GuardLink On-Machine™ EtherNet/IP™ interface.