Failed to create the module
There was a problem setting the slot of the module. The error message you receive indicates one of these conditions:
The slot is in use.
You entered a slot number that is already in use by another module. Reenter an available slot number.
The slot is out of range.
You entered a slot number that is out of range for the chassis. Reenter a slot number from 0 to one less than the chassis size.
No more than one (1) additional ControlLogix Controller is allowed in Local Chassis when redundancy enabled.
ControlLogix 5570 projects support one additional controller in the Local chassis when redundancy is enabled. ControlLogix 5580 and GuardLogix 5580 projects do not support any additional controllers in the Local chassis when redundancy is enabled. Either remove the additional controllers from the Local chassis or disable redundancy. For more details, see the
ControlLogix Redundancy User Manual
, publication no. 1756-UM535
.Provide Feedback