Calibration Wizard - Attach High Reference Tab 1756 Analog I/O
If you are calibrating an: | Use this tab to: |
input module | connect the high reference signal to the channels to be calibrated |
output module | prepare to measure the high calibration signal produced by the channels being calibrated |
If you are calibrating an input module, from this tab you can connect the high reference signal to the channels to be calibrated. To attach high reference voltage signals, apply the high reference values for each channel selected to calibrate.
After you have applied valid low and high reference signals, the module records calibration parameters and exits calibration to the operating state.
module
A device, typically an I/O device, that communicates with the controller. The controller, a particular 1756-IB16I or a PanelView are all considered modules.
Provide Feedback