Block Transfer Error Codes

00D0

The scanner did not receive a block-transfer response from the block-transfer module within 3.5 seconds of the request.

00D1

The checksum from the read response did not match the checksum of the data stream.

00D2

The scanner requested either a read or write but the block-transfer module responded with the opposite.

00D3

The scanner requested a length and the block-transfer module responded with a different length.

00D6

The scanner received a response from the block-transfer module indicating the write request failed.

00EA

The scanner was not configured to communicate with the rack that would contain this block-transfer module.

00EB

The logical slot specified is not available for the given rack size.

00EC

There is currently a block-transfer request in progress and a response is required before another request can begin.

00ED

The size of the block-transfer request is not consistent with valid block-transfer size requests.

00EE

The type of block-transfer request is not consistent with the expected BT_READ or BT_WRITE.

00EF

The scanner was unable to find an available slot in the block-transfer table to accommodate the block-transfer request.

00F0

The scanner received a request to reset the remote I/O channels while there were outstanding block-transfers.

00F3

Queues for remote block-transfers are full.

00F5

No communication channels are configured for the requested rack or slot.

00F6

No communication channels are configured for remote I/O.

00F7

The block-transfer timeout, set in the instruction, timed out before completion.

00F8

Error in block-transfer protocol - unsolicited block-transfer.

00F9

Block-transfer data was lost due to a bad communication channel.

00FA

The block-transfer module requested a different length than the associated block-transfer instruction.

00FB

The checksum of the block-transfer read data was wrong.

00FC

There was an invalid transfer of block-transfer write data between the adapter and the block-transfer module.

00FD

The size of the block-transfer plus the size of the index in the block-transfer data table was greater than the size of the block-transfer data table file.