Configure Alarms non-isolated analog input modules

Select

Channel

for the channel that you want to configure.

In the

Process Alarms

section, enter the desired process alarm values for:

Select

Unlatch All

to unlatch

all

alarms for the channel.

Select

Unlatch

ito unlatch the adjacent alarm condition.

Use the slider bar to visualize where the process alarm trigger parts are set for your process.

Select the

Disable All Alarms

check box ito disable alarms for the channel.

Select the

Latch Process Alarms

check box to maintain an alarm-triggered condition for any of the process alarms after the condition ceases.

Select the

Latch Rate Alarm

check box to maintain the alarm after the condition ceases.

In the

Deadband

box, enter a value for which the alarm will not disable, if the input value remains within the range of the alarm trigger point.

In the

Rate Alarm

box, enter a value (in Engineering Units per second), for the alarm to trigger when the rate of change between the input samples exceeds the setpoint.