Configure output limits

In the

Controller Organizer

, right-click the module and select

Properties

.

On the

Module Propertie

s dialog, select the

Limits

tab.

Select the

Channel

button to select the channel to configure.

Enter the

Limit

values for:

Select the

Ramp in Run Mode

check box to enable ramping during Run mode.

In

Ramp Rate

box, type the maximum rate of change that an output may make (in engineering units per second).

Select the

Disable All Alarms

check box to disable alarms for the current channel.

Select the

Latch Limit Alarms

to maintain the high and low limit alarms after the condition ceases.

Select the

Latch Rate Alarm

check box to maintain the rate alarm after the condition ceases.

Select

Unlatch

to unlatch the adjacent alarm condition.

Select

Unlatch All

to unlatch

all

alarms for the channel.

Use the slider bar to visualize where the process limit trigger values are set for your process.