Extended Error Codes
The Logix Designer application does not display any text for the extended error codes.
The table lists extended error codes for error code 0001.
Extended Error Code (Hex) | Description |
|---|---|
0100 | Connection in use |
0103 | Transport not supported |
0106 | Ownership conflict |
0107 | Connection not found |
0108 | Invalid connection type |
0109 | Invalid connection size |
0110 | Module not configured |
0111 | EPR not supported |
0113 | MSG write failed |
0114 | Wrong module |
0115 | Wrong device type |
0116 | Wrong revision |
0118 | Invalid configuration format |
011A | Application out of connections |
0203 | Connection timeout |
0204 | Unconnected message timeout |
0205 | Unconnected send parameter error |
0206 | Message too large |
0301 | No buffer memory |
0302 | Bandwidth not available |
0303 | No screens available |
0305 | Signature mismatch |
0311 | Port not available |
0312 | Link address not available |
0315 | Invalid segment type |
0317 | Connection not scheduled |
The table lists the extended error codes for error code 001F.
Extended Error Code (Hex) | Description |
|---|---|
0203 | Connection timeout |
The table lists the extended error codes for error code 0004 and 0005.
Extended Error Code (Hex) | Description |
|---|---|
0000 | extended status out of memory |
0001 | extended status out of instances |
The table lists the extended error codes for error code 00FF.
Extended Error Code (Hex) | Description |
|---|---|
2001 | Excessive IOI |
2002 | Bad parameter value |
2018 | Semaphore reject |
201B | Size too small |
201C | Invalid size |
2100 | Privilege failure |
2101 | Invalid keyswitch position |
2102 | Password invalid |
2103 | No password issued |
2104 | Address out of range |
2105 | Address and how many out of range |
2106 | Data in use |
2107 | Type is invalid or not supported |
2108 | Controller in upload or download mode |
2109 | Attempt to change number of array dimensions |
210A | Invalid symbol name |
210B | Symbol does not exist |
210E | Search failed |
210F | Task cannot start |
2110 | Unable to write |
2111 | Unable to read |
2112 | Shared routine not editable |
2113 | Controller in faulted mode |
2114 | Run mode inhibited |
Provide Feedback