PVSD datalinks

PVSD datalinks

Use the
Datalinks
 tab of the
PVSD Properties
 dialog box to monitor datalinks for the Process Variable Speed Drive (PVSD) instruction.
To monitor datalinks for PVSD instructions
  1. On the instruction in the routine, perform one of these actions:
    • On the Ladder or FBD instruction, select .
    • In the Structured Text editor, right-click the tag name and select
      Configure <tag name>
      .
  2. Select the arrow next to
    General
     and then select
    Datalinks
    .
  3. Set the parameter:
    • Output datalink operator setting
      . Type a value for the output datalink to use in operator mode. If the setting requires a signature, this will enforce security from the HMI and disable the setting from the Logix Designer dialog.
  4. View the read-only parameters:
    • Numeric values
      . Displays the current value of the input, configuration, or output.
    • Device state
      . When the
      Logix Designer
       application is online with the controller, the indicator displays the current device state, such as Stopped, Running, or Out of service.
    • Device issues
      . When the
      Logix Designer
       application is online with the controller, the indicator displays fault conditions, such as Drive fault or I/O fault.
Provide Feedback
Have questions or feedback about this documentation? Please submit your feedback here.